濟南通風管道加工保護管道成品的方法有什么？這是很多用戶想知道的一個問題，關系到后期的施工以及使用，下面就來看看。

　　What are the methods of ji 'nan ventilation pipeline processing and protection of pipeline finished products? This is a problem that many users want to know, which is related to the construction and use of the later stage. Let's take a look at it below.

　　通風管道穿越沉降縫時應按設計要求加設套管，套管與風管的間隙用填料(軟質)封堵嚴密。風管伸入結構風道時，其末端應安裝上鋼板網，防止系統運行時，雜物進入金屬風管內。金屬風管與結構風道縫隙應封堵嚴密。安裝完的風管要保證表面光滑潔凈，室外風管應有防雨、防雪措施。

　　When the ventilation pipe passes through the settlement joint, the casing shall be added according to the design requirements. The gap between the casing and the air pipe shall be tightly sealed with filler (soft). When the air duct is extended into the structural air duct, the steel plate net should be installed at the end of the air duct to prevent sundries from entering the metal duct during the operation of the system. The gap between metal duct and structural duct should be tightly sealed. The installed air duct should ensure that the surface is smooth and clean, and the outdoor air duct should be protected from rain and snow.

　　運輸和安裝不銹鋼，鋁板風管時，應避免產生刮傷表面的現象，安裝時，盡量減少與鐵質物品接觸。運輸和安裝閥件時，應避免由于碰撞而產生表面和葉片變形。露天堆放應有防雨、防雪措施。

　　When transporting and installing stainless steel and aluminum duct, the phenomenon of scratching the surface should be avoided. When installing, contact with iron items should be minimized. When transporting and installing valve parts, avoid surface and blade deformation due to collision. Measures shall be taken to prevent rain and snow in open-air stacking.

　　另外，在濟南通風管道加工安裝方法有具體的要求規范，是所有加工通風管道，個人和企業都需研究的內容，比如說：

　　In addition, there are specific requirements and specifications for the processing and installation of ventilation pipes in Jinan. It is the content that all the processing ventilation pipes, individuals and enterprises need to study, for example:

　　規格尺寸是通風管道的基本規格，所需要的通風管道尺寸和大小。值得注意的是，在進行規格確定的時候，需要與空調的使用進行聯系，只有這樣，才能夠保證通風管道規格設定之后，能夠與空調相互連接，并發揮使用功能，完成它們的使用效果。

　　Specification size is the basic specification of ventilation pipe, the size and size of the ventilation pipe required. It is worth noting that when determining the specifications, it is necessary to contact the use of air conditioning. Only in this way can we ensure that after the specification setting of the ventilation pipe, it can be connected with the air conditioning, and play the use function to complete their use effect.

　　類型有很多種，不同的類型與空調進行拼接使用，所發揮出來的效果也不一樣，尤其是保溫性的通風管道。進行通風管道加工，且讓它們更好結合空調進行工作，也要在加工之前考慮下它們的類型，這是確保它們作業，發揮優勢作用的好條件。

　　There are many types, different types of splicing and air conditioning use, the effect is not the same, especially the thermal insulation of the ventilation pipe. For ventilation pipe processing, and let them work better with air conditioning, also want to consider their type before processing, this is to ensure that they work efficiently, play a good role in the advantages of the condition.

　　總的來說，管道加工前，要與空調的基本情況相結合，并要注意通風管道的規格和類型，不同的空調需要不同的通風管道，規格不同，類型也不相同。所以在加工管道的時候，需要多考慮以上情況。

　　In general, before pipeline processing, it is necessary to combine with the basic situation of air conditioning, and pay attention to the specifications and types of ventilation pipes. Different air conditioners need different ventilation pipes, different specifications, and different types. So when processing pipelines, we need to consider the above situation.

　　濟南通風管道加工時為保證風管制作后的強度，在下料時粘合處有一邊要保留做護邊；風管在粘合前需預組合，檢查拼接縫處是否嚴密，尺寸是否符合要求。根據季節溫度、濕度及膠粘劑的性能確定粘合時間。粘接后，用角尺、鋼卷尺檢查、調整垂直度及對角線偏差應符合規定。在管道加工時，做好現場板材和預制管的成品保護工作。

　　Ji 'nan ventilation pipeline processing in order to ensure the strength of the duct after production, when the bonding side should be retained to do edge guard; Air duct should be pre-combined before bonding, check whether the joint is tight and whether the size meets the requirements. According to the seasonal temperature, humidity and adhesive properties to determine the best bonding time. After bonding, use square and steel tape to check and adjust verticality and diagonal deviation. Protect the finished products of plate and prefabricated pipe on site during pipeline processing.

　　今天就介紹到這里吧，更多內容就來網站cdxysh.cn咨詢吧！

　　Today is introduced here, more content to the website consultation!